10 kN Capacity Trapezoidal Screw Thread Screw Jack

Jacton 10 kn capacity trapezoidal screw thread screw jack are the ideal product to push, pull, lift, lower and position adjustment of feed rate movement or air dampers. Standard worm gear ratios 5:1 and 20:1. Standard design with translating screw, keyed screw for anti-rotation, and rotating screw with traveling nut.


Features of 10 kN Capacity Trapezoidal Screw Thread Screw Jack
1. Upright or inverted installation with maximum static load capacity 10 kN in tension or compression.
2. Self-locking with no need brake or lock mechanisms to hold position. 
3. Trapezoidal screw with 20mm diameter, 4mm pitch (single start trapezoidal screw thread).
4. Available in 5:1 and 20:1 ratios.
5. Custom travel lengths from 5mm to 1500mm. 
6. Translating screw (travelling screw jacks), keyed screw for anti-rotation, and rotating screw with traveling nut (travelling nut screw jacks) as the standard configurations.
7. Worm screw is rotated by a handwheel with handle (manual operated screw jack) or by a electrical motor (electric motor screw jack). 
8. Can be applied either individually use or combined into a exactly synchronized lifting system, linked by connecting shafts, bevel gears and couplings etc.

Structures of 10 kN Capacity Trapezoidal Screw Thread Screw Jack
1. Trapezoidal screw material - C45 steel
2. Worm (input shaft) material - C45 steel
3. Worm gear material - bronze
4. Housing (gearbox) material - ductile iron
5. Traveling nut or Safety nut - bronze  

Specifications of 10 kN Capacity Trapezoidal Screw Thread Screw Jack
The specifications of 10 kn capacity trapezoidal screw thread screw jack include maximum load capacity, worm screw diameter and pitch, worm gear ratio, allowable maximum input power, torque and speed and overall efficiency etc. 

1. Conditions: within 20% running time/60 minutes or within 30% running time/10 minutes, 20 °C ambient temperature. 
2. Note: Number of synchronizing jacks which can be connected on the same line is limited by input shaft strength. Refer to the maximum allowable input shaft torque on the above table.
3. Relative humidity: 85% or less (no dew condensation). 
4. Operating ambient atmosphere: Indoor Environment (Indoor room where rain and water cannot enter. Dust volume should be normal).
5. Selection of screw jacks using above figures should only be carried out in consultation with Jacton engineers.

Assembly Drawings of 10 kN Capacity Trapezoidal Screw Thread Screw Jack
Find out 10 kn capacity trapezoidal screw thread screw jack front view, side view and top view assembly drawings. About 2D Autocad dwg, dxf assembly drawings, and 3D stp, step, model, igs, prt or catpart assembly drawings of 10 kn capacity trapezoidal screw thread screw jack, please contact us directly.